Operation Manual

23
Setting the focus manually:
XIf you have several hearing programs, change to
hearing program 1.
XPress the rocker switch that is set for this function.
The mid level is active by default.
XPress the upper rocker switch to focus more to
the front, or the lower rocker switch to lien to
the broader environment.
This function is intended for unique and temporary
liening situations. The hearing inruments thus return
automatically to the automatic setting of program 1 if
the sound environment changes signicantly or after
approximately 45 minutes. You can also exit the spatial
congurator mode.
Exiting spatial congurator mode:
XToggle to the minimum or maximum level.
An optional signal tone can indicate the minimum and
maximum level.
XToggle one ep further.
The same signal tone as for changing the hearing
program is played, indicating that you have exited
the spatial congurator mode.
Signia Pure primax EN.indd 23 18.01.2016 13:13:57