Operation Manual

13
Replacing batteries
Removing the battery:
XOpen the battery compartment.
XUse the magnet ick to pull out
the battery. The magnet ick is
available as an accessory.
Inserting the battery:
XIf the battery has a protective lm, remove it
only when you are ready to use the battery.
XInsert the battery with the "+" symbol
facing up (refer to the picture).
XCarefully close the battery compartment. If you feel
resiance, the battery is not inserted correctly.
Do not attempt to close the battery compartment by
force. It can be damaged.
Signia Pure primax EN.indd 13 18.01.2016 13:13:45