Operation Manual

29
Problem and possible solutions
Hearing inrument emits whiling sounds.
Reinsert the hearing inrument until
it ts securely.
Decrease the volume.
Clean the hearing inrument.
Sound is diorted.
Decrease the volume.
Replace the empty battery.
Clean the hearing inrument.
Ask your Hearing Care Professional to exchange
the wax protection and/or the microphone cover.
Hearing inrument emits signal tones.
Replace the empty battery.
Hearing inrument does not work.
Turn the hearing inrument on.
Gently close the battery compartment completely.
Replace the empty battery.
Make sure the battery is inserted correctly.
Power-on delay is active. Wait several seconds
and check again.
Consult your Hearing Care Professional if you encounter
further problems.
Signia ITE primax EN.indd 29 27.01.2016 10:38:29