User`s manual
22
MD AREA: This option allows you select the area you want to be
sensitive to motion. The channel is separated into a 13*10 area. When
any object moves into the motion detection area, and the area where
the object is located is displayed in red recording will be triggered. In
the semi-transparent area the motion detection is off.
5.2.6.6 Motion Detect
5.2.7 System Function
5.2.7.1 Time Set
5.2.7.2 Password
Click [MainDeviceMotion] to enter into the [Motion Detection]
menu to setup motion detection recording.
The [Motion detection] Menu has three sections, including
Channel Status, Sensitivity and Motion area.
Channel STATUS: This option allow you enable motion detection
on any channel.
SENSITIVITY: This option allows you to set sensitivity level of
motion detection from 1 to 4 with 4 being the most sensitive.
The [System] Menu includes the below sub-menus: Time Set, User
Password, Audio/Video Setting, Language select, System Info and
System Maintenance.
After entering into the [System], you can configure the system to
meet your needs.
This option allows you set the device ID for the DVR and set the
system password if you want to use one. The new passwords will be
available after clicking [APPLY] button.
DATE: config the day, month, and year
DATE FORMAT: Select DD/MM/YYYY, MM/DD/YYYY, or
YYYY/MM/DD
TIME: config the time
TIME FORMAT: Use the drop-down menu and select 12HOURS or
24HOURS
DST: (day saving time) Use the drop-down menu to select ON/OFF to
enable/disable Daylight Savings Time.
Click APPLY button to save your settings.
Picture 5-47
Picture 5-48
Picture 5-49
Picture 5-50