User`s manual

14
5.2.3 Network Set
Enter into [Main MenuNetwork Set] to proceed network set (Shown as picture 5-15):
When selecting DHCP, DHCP server will allocate DVR IP address automatically.
When selecting PPPoE, you need to input user and password provided by ISP supplier and set up web
port (details please refer to the below picture 5-16).
When selecting static allocation, you need to setup IP address, net-mask, and gateway and web port
(shown as picture 5-17).
After selecting network mode - such as DHCPPPPOE and
static allocation and setup web port, you could visit DVR remotely
via network.
If you need to visit DVR via Internet, you should setup the
inflection of video port at the public Router located in the DVR
(shown as Picture 5-19).
Host Port: 9000
Web Port: 8080
LAN IP address of DVR: 192.168.1.101
Input http:// router IP:8080 (192.168.1.101:8080) to you
computer IE browser,then you will visit your DVR freely.
If you apply for DDNS service and set up net parameter of
DVR accordingly, you could visit DVR remotely via IE browser.
(Shown as picture 5-18)
Picture 5-15
Picture 5-16
Picture 5-17
Picture 5-18
Picture 5-19