User`s manual

12
5.2.1.3. Autoseq Setup
Go to main interface and trigger the pop-up menu bar, you will find the START A UTOSRQ menu.
Click it and the DVR will enter auto sequence display mode. Press any key will exit autoseq mode.
5.2.2 Record setup
AUDIO REC.: DVR supports to record 1 channel audio signal. Here you can bind the audio channel to an
appointed video channel for together recording.
FILE SIZE: System record and save the videos to HDD by separate files. It indicates the maximum recoding
Functions：
CHANNEL: ON/OFF option decides to record or not.
RESOLUTION: (4-CH only) decides the recording video resolution.
About the definition of resolution, please refer to the specification
chapter.
QUALITY: select recording video quality, higher quality will need
more HDD space to save the video
AUTOSEQ allows system to display every selected
channel in full screen by certain dwell time, and auto-switch
in sequence.
Default dwell time: 5 second
Selectable time range: 0~10 seconds
2. Press SETUP button to adjust the position of the privacy
zones
3. After finishing the position adjustment, press ESC key on
front panel or click right button of mouse to exit and return
to PRIVACY ZONE page.
4. Press [APPLY] button to save you settings.
Picture 5-8
Picture 5-9
Picture 5-10
Picture 5-11