User`s manual

11
Privacy z one function allows you to cover the private area,
such as password input area on ATM machines. The covered
areas will not be able to see in live view mode or in playback
mode.
You can select maximum 4 privacy zones for each channel.
1. Select the No. of area (AREA1 – AREA4) you want to set
5.2 Main Menu
& motion detection etc, you can also set system function settings, such as Time setting, User password,
Audio/Video setting, Language select, and access system information, system maintenance etc.
5.2.1 Camera setup
5.2.1.1. Color Setup
2If you want to cancel the modification, click [Exit] button to exit the menu.
3When clicking [DEFAULT] button, all system default values will be reset to default value.
4System default value indicates the value pre-set at the factory.
5.2.1.2. Privacy Zone Setup
After clicking right button of mouse, pop-up menu will be displayed
on the screen. You can click [main menu] button on pop-up menu to
enter into Main menu interface (Shown as Picture 5-4). You can also
use the Menu button on the front panel to bring up the window, when
using the front panel buttons use the FWD and REW button to move in
the menu, and the SEL button to select the icon. You use the ESC
button to return to previous window. In Main Menu mode, you can
control device management settings, such as Camera, Recording,
Network, Recording search, HDD, Alarm, PTZ Control, Mobile Phone
Go to [Main Menu Camera] to set up the name display and
position display of each channel (Shown as Picture 5-5), You can also
adjust image brightness, saturation, contrast and hue settings of each
channel after entering into [Color] Menu and set up whether each
channel can be previewed or not under Live display and/or Recording
mode.
Please note that the name of each channel supports up to eight
characters.
Below is the Color Menu where you can adjust image brightness,
saturation, contrast and hue parameters of each channel.(shown as
picture 5-6)
Explanation
1The modifications will be available after clicking [APPLY] button on
the bottom of the sub-menu windows and being prompted to save and
then clicking [ok] button.
Picture 5-4
Picture 5-5
Picture 5-6
Picture 5-7