User`s manual

9
Chapter 4: DVR Boot up
4.1 System Initialization
4.2 Main Interface
Chapter 5: DVR Menu
Pop-up Menu
After system initialization finishes, click right button of mouse on main interface display to enter into
Pop-up Menu. You can also use the Remote Control or the buttons on the front panel of the DVR. Now you
can set parameters and control Main Menu, Menu lock, Recording search, PTZ control and recording etc.
On Main interface mode, double-click one single channel and right-click button of Mouse to enter
into pop-up Menu, and now you could highlight and click [Digital Zoom] menu to enlarge live image of
After connecting the power adapter，the system will boot-up
and start initializing。
After finishing system initialization, the system will enter into main
interface. Picture 4-2 is the main interface displayed by system, which is
showing no video input status. Once there are video inputs, the interface
will display live images from the cameras. In main interface mode, if you
use the mouse to double-click the live image of any channel, the image
will be maximized to full screen, by double-clicking again, the display will
be come back to display all cameras; clicking the right button of the
mouse, will enter into Pop-up Menu; by clicking the left button of the
mouse, you select menu items; when clicking any area outside the menu,
you will exit the Pop-up menu.
Picture 4-1
Picture 4-2
Picture 5-1