User guide

Integrity Voice Alarm Routing Matrix

‘Disabled if Mute1 Active’ normally supplies the monitoring tone but turns it off in any zone(s) that are currently muted

with the default muting option. If a power failure occurs the zone(s) affected will be muted for all except emergency

messages, and the tone to the affected zone(s) suppressed. This maximises the battery backup time for that area.

'Pulsed if mute1 active' is similar, but is designed amplifiers that can work with pulsed tone monitoring.

Service

This page allows contact details to be entered. If this page is filled in (and the Show Service Details box is checked)

then if the Integrity system goes into fault these details are shown on the display of the Integrity Mainframe.

Mute

This allows a description for the mute to be entered (the defaults are Mute 1 to Mute 4) and, if required, an alternative

input image (icon) to be selected. (There may be up to mute tabs)