User guide

Integrity Voice Alarm Routing Matrix

Hardware Page

This page allows you to manage the selection of input and output cards. Each card is configured separately.

The following card types are supported by Integrity Editor:

CPU Card – Central Processor Unit. All other cards are controlled by the CPU.

1LS Card – Normally used for simple devices such as all-call emergency microphones or single zone desk mics.

Comprises a balanced line level audio input, a 24 Vd.c. output, monitored PTT input and busy output.

PA16 Card (obsolete 01-06-2004) – Used to connect to up to four 16PDM paging microphones.

GPI Card – Used to connect to MPP or MPC emergency and paging consoles and to link them to up to four Integrity

mainframes to control larger systems.

SVM Card – The SoundVault card can store up to 32 seconds of monitored audio. Normally used for emergency

messages.

BGM Card – Used to connect audio sources such as CD players, tuners etc. and to control their routing. Comprises a

pair of stereo RCA (phono) jacks and terminals for the connection of routing switches.

OP2 Card – Routes any of the eight audio channels to either of its outputs under control of Integrity Editor.

CI16 Card – Normally used for the fire alarm interface and connected to monitored sounder circuits.