User guide

Integrity Voice Alarm Routing Matrix

Cause and Effects Page

This page allows the system designer to determine how control triggers and audio input sources are connected to

output zones and to test the results.

Audio input sources are represented by icons in the left hand column, under 'Type'. The zones are on the right hand

side of the screen, represented by. These entries are created automatically using information from the hardware page.

To determine which input source is going to be played in which zones select an icon by clicking on it and click in one

of the boxes in the cause and effects matrix.

You can hear the audio simulation to a particular zone if you have it enabled on your system, by clicking on the

speaker for that zone.

The icons are prioritised on the left hand side. If you wish to change the priority simply click on the icon that you wish

to change and drag and drop it into the desired priority location. The rest of the icons will be rearranged automatically.

A typical cause and effects page

Input Matrix

This matrix shows the icons representing the input sources, as well as showing the location of the input source within

the Integrity hardware. It also displays the priority number of the input device and a description of the input source.

By using this matrix you are able to alter the priority of any input. Click on the input icon that you want to change and

drag and place it in the desired priority. The rests of the icons will change their priority sequence automatically.

The matrix can show in one of two forms (depending on whether the ‘Hide Slot and Subunit’ option is selected on the

Options tab).