User guide

Integrity Voice Alarm Routing Matrix

Context Sensitive Help

You can obtain help on a page (Cause and Effects, Hardware, etc.) by clicking that tab and pressing F1. More specific

help can be obtained by clicking in the appropriate area of the picture shown in the help file.

Summary of Page Tabs

Cause and Effects Page

This page allows the system designer to determine how control triggers operate and which audio input sources are

connected to output zones at what priority and to test the results.

Hardware Page

This page allows you to manage the selection of input and output cards. Each card is configured separately.

Options Page

This page allows you to customise the SigNET Integrity configuration software to suit non-standard applications.

Simulation Page

This page allows you to set the default paths to the audio files used for the simulated live and pre-recorded messages.

Specification Page

This page allows you to view and print a specification collated from the other pages in the Inegrity Editor software.

Integrity Config Page

This page is not visible until the Password (supplied with the system) is entered. Once visible, this tab allows you to

upload the configuration to the mainframe.

Notes Page

This page allows you to record any information you wish and is typically used to record details specific to the

configuration of the system.