User guide

Integrity Voice Alarm Routing Matrix

Get Physical Card types. This button transfers the physical cards seen in the Integrity mainframe into the

current cause and effect. This can be useful when designing a cause and effects for a system that already exists.

The current status of communication is shown at the top of the screen.

The Tx indicator lights yellow whenever the Integrity Editor is trying to communicate with the Integrity unit.

The Rx indicator lights whenever data is received from Integrity.

The Sync indicator turns from RED to GREEN whenever a successful exchange of data has been established. This is

distinct from the Rx indicator, which illuminates whenever data is received, be it valid or not.

Disclaimer

SigNET is committed to continuous improvement and all SigNET products are subject to change without notice.

Errors and omissions excepted.

SigNET (AC) Ltd.

Tower Road,

Glover Industrial Estate,

Washington

Tyne & Wear

NE37 2SH

Telephone: (+44 ) 191 4174551

Fax: (+44 ) 191 4170634

Internet : www.signet-ac.co.uk

E-Mail : info@signet-ac.co.uk