User guide

Integrity Voice Alarm Routing Matrix

CI16 Card – Normal Mode

The page can appear in two forms, depending on whether expert mode is enabled (see Options page).

This page allows you to set the number of triggers you require (max 16). There is also a reset input but this is not

shown on the software as it is always available. The card also has a 24 Vd.c. 50 mA protected voltage output which

can be used when voltage reversal triggers (fire alarm sounder circuits) are not available.

When an input is triggered, for instance to play an emergency message, the message will continue to play until a reset

signal is received.

If the number of contacts is changed, the number of contacts available is reduced in the right hand box. In addition to

this, individual contacts can be disabled by clicking on the appropriate check box in the usage column, as shown for

contact 4 on the image below.