Safety Instructions
Sma Life
1. Download the “Sma Life” app
from the APP Store or Google
Play.
3. Connect to 2.4GHz Wi-Fi
network and turn Bluetooth
on from you mobile phone.
2. Register an account and allow
the app to use Bluetooth.
Log in with Existing Account
Register
"Sma Life" Would Like to
Use Bluetooth
This will allow the app to nd and
connect Bluetooth accessories.
This app may also use Bluetooth
to locate Bluetooth device.
Don't Allow OK
4. Charge and turn on power buon of HDMI control box, the light ash and enter the pairing mode
automatically. Please complete the network arrangement within 10 minutes and the light doesn't
ash. To remove device or reset factory Seings, switch the device on and o for three times
within ve seconds until the light ash again, you can enter the pairing mode.
5. Aer completing the above operation instructions, open the Sma Life APP, "Devices to be
added" will pop up on the Sma Life homepage, click Add Advice, and follow the APP prompts
to complete the subsequent operations.
6. If the home page does not prompt "Devices to be added", you need to manually tap the top
right "+" icon in the top right corner, click Add Advice, and follow the APP prompts to complete
the subsequent operations.
Tips
If you have already downloaded the "Sma Life" App and registered the account, you can skip step1
and step 2.
Please check your current APP version is 4.0.0(20220513162618) or above.