User`s manual

52
Digital I/O
Setting up Events for Outputs
1. From the 1100R+ main menu, press Set
User Preferences.
2. Press down to Set Digital Outputs.
3. Scroll to the digital output pin you
want to setup.
4
. Press S.
5. Scroll to the test event you want to
start the operation of your output device.
Then press Accept.
6. Press R.
7. Scroll to the event that you want to
stop the operation of your output device.
Press Accept.
8. Press back to return from the digital
output selection menu.
The S event sets (or sinks) the output pin to ground
thereby allowing current to flow through the output
circuit.
The R event resets the output pin to the original no
current flowing state.