User`s manual

39
Component
Settin
g
& Test
4. Select Set Learn Settings.
5. Select Set Learn Components.
6. Select the DOWN button.
7. Turn on the 4W Kelvin setting. You are
now ready to learn and use 4-Wire on the
1100H+.
8. Using the BACK arrow, return to the
Create New Test screen and select Learn.
9. Select the DOWN button.
10. Select Probe 4W Point Type.
11. Use the probe to touch each point in
question on the adapter that is plugged into
the tester.
12. The type will be displayed as the point is
probed.