Manualshelf

User`s manual

ManualsBrandsSignature ManualsCable Tester1100R+
21222324252627282930
26
Overview of
Preferences
and Settings
Restoring Factory Default Preferences and Settings
The factory defaults for User Preferences, Learn Settings, and Test Settings for the loaded test
may be restored at any time.
To Restore all Preferences and Settings to the Factory Defaults:
1. From the main menu press Set User
Preferences.
2. Scroll down and press Set Factory
Defaults.
3. Press RESET.
What Happens when a Cable is Tested on the 1100R+
When the tester is set up with its factory default preferences and settings there are two parts to
the test:
Note that the Intermittents test will not occur if the User Preference Test Mode is set to Single Test.
First Part
Low Voltage Test
The tester checks the
cable for opens, shorts and
miswires.
Second Part
Intermittents Test
Until the cable is removed,
the tester repetitively runs
low voltage tests to check