User`s manual

18
Using the
Tester
Using a Test Summary
A test summary displays the test results of a batch of cables that were tested.
To Display a Test Summary
After testing a good cable

Press Get Test Summary Cnt.
This screen shows the test summary counts
for the total number of tested cables, as well
as the number of good and bad cables
tested.

Press here to print the test summary
to a connected printer.
The printed test summary shows the Cable
Signature, adapter setup, Test Parameter
Settings, and the cable counts for a batch of
tested cables. If desired you can attach the
printed test summary to a batch of tested
cables to substantiate the test results of the
batch.
Note that you can change the format of the
Test Summary to display only the count for
good cables. For more information see Test
Summary Count on page 29.
1100R Test Summary
Cable Signature: 39392F-4Z020
Adapter Signatures
J1 F5B4E0
J2 03FAC1
Test Parameter Settings
Connection Resistance Threshold <=10.9 ohm
LV Insulation Resistance Threshold > 500K ohm
High Voltage: 50V
HV Insulation Resistance: 20.0M ohm
Duration: .01 secretary
Hipot To: ALL ADAPTER PINS
Max Soak: 0 secretary
Connections:
1 J1-001 to J2-005
2 J2-007 to J2-005
Test Summary Counts:
Total Tests: 105
Bad: 3 Good: 102