User`s manual

15
Using the
Tester
You’ve created a test program!

Remove the sample cable.

You are ready to:
Save the learned test in memory
OR
Start testing
Documenting a Test Program
Documenting a test program is important so you know what the test program contains and where
it’s located. To document a test program:
1. Create a test program as described in
the previous section.
2. If you have a printer connected, print
the results.

Press down to view the print
option.

Press Print
The printer prints out the documentation
If you don’t have a printer connected,
transcribe the results.

Press Verify Test.

Scroll down , recording the
information on an 1100R+ Cable
Documentation Form (blank form in
the appendix).
If you are storing the cable to a memory
location, make sure to write the location
down on the 1100R+ Cable
Documentation, or on the 1100R+
Memory Location Listing (blank in the
appendix). For more information see
Using the Tester Memory on page 19.