User`s manual

14
Using the
Tester
Using the Tester
Creating a Test Program
You create a test program by learning a sample cable. After learning the cable, you verify the
learned cable is correct. To create a test program from a sample cable:
1. Attach the sample cable.

Remove the cover plate and install
the correct adapters.

Replace the cover plate.

Connect the sample cable.
2. Learn the sample cable.

From the main menu, press Set
Up Test Program.

Press Create New Test.

Press LEARN.
3. Verify the sample cable.
If you are recreating a test you’ve
previously verified, make sure the
Cable Signature matches the Cable
Signature of the previously verified
test.
If this is the first time you’ve
created the test,

Press Verify Test
*
.

Scroll down .

Verify the learned connections
match the cable’s build list
exactly. You should also verify
the Test Parameter Settings are
set the way you want them.

Push the back button to return
to the CABLE LEARNED menu.
Using the
Tester
Cover Plate
Adapters
*
If you have a connected
printer, you can verify by
printing. For more
information see Documenting
a Cable on the next page.
1100R+ Cable Documentation
Cable Signature: 39E92F-4Z020
J1 Adapter Signature: F5B4E0
J2 Adapter Signature: 03FAC1
Connection Resistance: <Auto .5