User`s manual

Tester

Basics

Duplicating the Adapter Setup

If you retrieve a test program from memory, you will need to put the adapters in the same

positions defined in the test program. Duplicating the adapter setup for a test keeps test results

and the Cable Signature consistent.

When you create a new test, you

can put the adapters in any

available position.

But when you use the same test

again the adapters must be inserted

into those same positions.

Can’t remember where the

adapters go?

Don’t worry – If you saved the test

program in memory, the tester can

tell you, or you can use the

documentation you created for the

test.

RIGHT

WRONG

Matches the

original setup.

Doesn’t Match

Adapter positions in

the original test setup.