User`s manual

7
Tester
Basics
Tester Basics
Basic Operation
Changing the Speaker Volume
Depending on the environment where the tester is used, you may want to change the speaker
volume.
To Change the Speaker Volume:
1. From the main menu, press Set
User Preferences.
2. Scroll down two times, then
press Set Volume.
3. Press up or down to
change or turn off the volume.
Need louder sounds?
If the sound selection is inadequate, you can make an
adjustment inside the unit. For more information, see
Changing Volume and Display Controls on page 57.
4. Press back to return to the
main menu.
Tester
Basics
The speaker selections are OFF,
LOW, MEDIUM, and HIGH.
As you adjust the speaker volume,
you will hear audible beeps
indicating the current volume.
SET USER PREFS
Set Test Methods
Set Test Summary Cnt
Set Auto Tst Results
SET VOLUME
HIGH
ACCEPT
CANCEL
Menu Title
Always on top line
in capital letters.
Up/Down Buttons
Scroll menu options
and settings.
Selection Buttons
Select menu options.
Available Directional Buttons
Displayed on top line. May include:
Top of list: more below.
Scroll either up or down.
Scroll up or go back.
Back Button
Returns to the
previous menu or
to the main menu.
SIGNATURE 1100R+
Set User Preferences
Set Up Test Program
TEST: 1B4137-4Z020
Good/Bad LED Lights
Green light if cable passes the test.
Red light if cable has errors.