Specification Sheet
Table Of Contents
≥ 24"
(610 mm)
CUTOUT DIMENSIONS – FLUSH INSTALLATION
UC DRAWERS
TOP VIEW
INSTALLATION CLEARANCES – FLUSH INSTALLATION 3/4" CUSTOM PANEL DIMENSIONS – FLUSH INSTALLATION
SKSUD2402P
24-INCH BUILT-IN UNDERCOUNTER
DRAWER REFRIGERATOR
A minimum 4" (101 mm) finished return that matches the cabinet
exterior is recommended on all sides and at the top of the cutout
opening. The shaded area will be visible after installation.
*
Side clearance at cabinet
Side clearance at front panel
**
*
23 11/16"
(602 mm) with panel
23 7/16"
(595 mm)
23 11/16" (602 mm)
Upper drawer =
15 9/16"
(395 mm)
Lower drawer =
18 3/8"
(467 mm)
18"
(457 mm)
with panel
≥ 24" (610 mm)
5/16"
(7.5 mm)*
3/16"
(4 mm)**
3/16"
(4 mm)**
5/16"
min.
min.
(7.5 mm)*
23 11/16"
(602 mm)
15"
(381 mm)
≥ 24"
(610 mm)
≥ 34 1/2"
(876 mm)
30 5/16"
(770 mm)
4"
(101 mm)
Page 4 of 4 | Eective 1/22
SKSUD2402P
23 11/16" (602 mm)
with panel
*23 1/4" (590 mm)
**22 1/2" (571 mm)
***20 1/2" (520 mm)
34 1/4"
(870 mm) min.
34 5/8"
(880 mm) max.
15"
(381 mm)
33 3/16"
(843 mm) min.
33 9/16"
(853 mm) max.
15"
(381 mm)
4" (101 mm)
1/4" (7 mm)
4"
(101 mm)
5"
(128 mm)
OVERALL PRODUCT DIMENSIONS
FRONT VIEW
SIDE VIEW
SKSUD2402P
24-INCH BUILT-IN UNDERCOUNTER
DRAWER REFRIGERATOR
*
**
***
Depth with 3/4" (19 mm) drawer panel
Depth with drawers (no panel)
Unit depth without drawers
This unit is designed to be customized with decorative panels.
Field-installed custom door panels or an optional Stainless Steel
Panel Kit is required.
For Custom Panels: Use templates provided with units to
pre-drill holes for mounting panel brackets (provided with unit).
Adjustment screws and instructions also provided with units.
The custom panel dimensions are same for the upper and
lower drawers.
™
This unit can be installed with an optional Stainless Steel Panel
Kit. Kit includes two drawer panels and two handles.