Specs

Page 3 of 3 | Effective 10/20 | WCAG
CUTOUT DIMENSIONS
SKSRT480SIS
48-INCH DUAL-FUEL PRO RANGETOP WITH
SOUS-VIDE AND INDUCTION
OVERALL PRODUCT DIMENSIONS
10" (254 mm)
min. to
combustible
sidewall
material
(both sides)†
48-INCH RANGETOP CUTOUT DIMENSIONS
36" (914 mm) min. from bottom
of hood to cooking surface
36"
(914 mm)
Cooking Surface
48"
(1219 mm) min. distance
between overhead cabinets
or combustible material†
18"
(457 mm)
min.
48"
(1219 mm) opening width
13"
(330 mm)
max.
cabinet
depth
Platform/Base
1" (25 mm)
min. thickness
4" (102 mm)
16"
(406 mm)
Electric & Gas supply
located through bottom
left rear corner of platform
24" (610 mm) min.
25" (635 mm) max.
As defined in the “National Fuel Gas Code” (ANSI Z223.1, Current Edition). Clearances from non-combustiblematerials
are not part of the ANSI Z21.1 scope and are not certified by CSA. Clearances of less than 12" (305 mm) must be approved
by the local codes and/or by the local authority having jurisdiction.
NOTE: Shaded area above countertop indicates minimum clearance to combustible surfaces, combustible materials cannot
be located within this area. For island installation, 12" (305 mm) minimum clearance from back of rangetop.
†
7 13/16" (198 mm)
Model: SKSRT480SIS
countertop
to cooking
surface
47 7/8"
(1216 mm)
width
7 13/16"
(198 mm)
1 5/32"
(30 mm)
Important Installation Information: Rangetops use
a single phase, four-wire cable, 120/240 volt, 60 hertz,
AC-only electrical supply with ground.
The location of gas burners and cooktop modules
vary depending on the rangetop model.
Product Dimensions and Clearances
Sideview
3 7/16" (87 mm)
control panel depth
27 15/16" (710 mm)
to front edge
28 15/16" (735 mm)
to front of knob
26 3/4" (679 mm)
24 1/2" (622 mm)
CUTOUT DIMENSIONS
OVERALL PRODUCT DIMENSIONS