Product Datasheet/Brochure
Page 5 of 5 | Eective 1/18
Door Panel
(756 mm)
29 3/4"
CUSTOM PANEL DIMENSIONS – FLUSH INSTALLATION
47 3/4" (1213 mm)
(756 mm)
29 3/4"
DUAL 18" AND 30" COLUMN
SKSCR3001P
30" INTEGRATED
REFRIGERATOR COLUMN
Door Panel Door Panel
79 7/8"
(2029 mm)
79 7/8"
(2029 mm)
(451 mm)
17 3/4"
SINGLE COLUMN
OPTIONAL ACCESSORIES – FLUSH
OR PROUD INSTALLATION
v.10 p3
SINGLE COLUMN
INTEGRATED COLUMNS
Door Panel
(756 mm)
29 3/4"
CUSTOM PANEL DIMENSIONS – FLUSH INSTALLATION
47 3/4"
(1213 mm)
(756 mm)
29 3/4"
DUAL 18" AND 30" COLUMN
SKSCR3001P
30" INTEGRATED
REFRIGERATOR COLUMN
Door Panel Door Panel
79 7/8"
(2029 mm)
79 7/8"
(2029 mm)
(451 mm)
17 3/4"
SINGLE COLUMN
OPTIONAL ACCESSORIES – FLUSH
OR PROUD INSTALLATION
v.10 p3
This unit can be installed with an optional
Stainless Steel Panel Kit. Kit includes one
door panel, one toe kick and one handle. This
kit is reversible and can be used in both Right
Hand and Left Hand door swing installations.
This unit can be installed in a 24" (610 mm)
deep cutout with an optional frame kit. This
kit includes two 80" (2032 mm) brushed
aluminum side trim pieces. Each trim piece is
5" (127 mm) deep with a 1/8" (3 mm) front face.
SKSHK310HS – 31 11/16" (805 mm) Medium
Handle – Brushed Aluminum
SKSHK480HS – 48" (1219 mm) Long
Handle – Brushed Aluminum
The Stainless Steel Panel Kit may be used in
a ush 25" (635 mm) cutout depth installation
or in a proud 24" (610 mm) cutout depth
installation.
For retrot/replacement installations where
the existing cutout is 24" (610 mm) deep, the
optional frame kit is recommended.
These units are designed to be customized
with decorative panels. Field-installed
custom door panels or an optional Stainless
Steel Panel Kit is required.
For Custom Panels: Use templates
provided with units to pre-drill holes for
mounting panel brackets (provided with
unit). Adjustment screws and instructions
also provided with units.
Maximum total door panel weight for
30-inch Integrated Column is 64 lbs.
Maximum total door panel weight for
18-inch Integrated Column is 44 lbs.
4" (102 mm) will be visible on the interior
sides of the furniture return. It is
recommended that both sides of each
cutout panel be nished to match the
cabinet exterior.
If using custom panels, a custom toe kick is
required. The bottom of case is unnished.
Door Handles: Handles are not included
with the units. Custom handles are required
for installation. Brushed Aluminum Handles
are available as an optional accessory.
SKSCR3001P
30-INCH INTEGRATED COLUMN
REFRIGERATOR