Specs

Page 6 of 6 | Effective 7/20 | WCAG
SKSMD2401S
MICROWAVE OVEN DRAWER
1 9/64" (29 mm)
Door Thickness
15" (381 mm)
Auto Drawer
Opening
4 11/16" (119 mm)
1 3/4" (44 mm)
4" (102 mm)
21 5/8"
(549 mm)
14 19/32"
(371 mm)
21 7/8" (556 mm)
23 7/8"
(606 mm)
15 7/8"
(403 mm)
Anti-Tip Block
*Can also be installed using an electrical outlet in an adjacent cabinet within the area where the provided
electrical cord can reach. Power cord access hole in cabinet should be a minimum 1 1/2" (38 mm) diameter
hole and deburred of all sharp edges.
Suggested electrical
outlet location*
6" (152 mm)
5" (127 mm)
4" (101 mm)
3 1/2" (89 mm)
15 9/16"
(395 mm)
36" (914 mm)
Countertop
Height
24" (914 mm)
Cabinet Minimum
23 1/2"
(597 mm)
Minimum
Depth
B
D
C
A
A
22 1/8"
(562 mm)
14 13/16" (376 mm)
to Bottom of Anti-Tip Block
C - Allow 7/16" (11 mm) minimum space
A - Allow 7/8"
(22 mm) overlap
B - Allow 3/16"
(5 mm) overlap
D - Allow 1/8"
(3 mm) overlap
Standard (Proud) InstallationOverall Product Dimensions
Mounting Screw Location
Flush Installation
*Can also be installed using an electrical outlet in an adjacent cabinet within the
area where the provided electrical cord can reach. Power cord access hole in
cabinet should be a minimum 1 1/2"
(38 mm) diameter hole and deburred of all
sharp edges.
Anti-Tip Block
Suggested electrical
outlet location*
4"
(101 mm)
3 1/2" (89 mm)
6" (152 mm)
23 1/2" (597 mm)
Minimum Depth
16 7/8" (429 mm)
14 13/16" (376 mm)
to Bottom of Anti-Tip Block
5" (127 mm)
24 3/16" (614 mm) Minimum
24 1/2" (622 mm) Maximum
1 1/16" (27 mm)
1 3/4" (44 mm)
22 1/8"
(562 mm)
1 3/4"
(44 mm)
Note: the face of the
shelf must sit 1 3/4"
(44.4 mm) back from
the face of the cabinet.
Shelf
face
Cabinet face
Note: the mounting surface of the
finished cleat must sit 1 1/16" (27 mm)
back from the face of the cabinet (pushing
the face of the drawer out 1/4" (6 mm))
Anti-Tip Block
Cabinet face
Drawer
face
Mounting
cleat
Top view
22 1/8"
(562 mm)
Mounting cleat
opening width
C
L
True Flush Installation
16 7/8"
(429 mm)
Note: the mounting surface of the
finished cleat must sit 1 1/16" (27 mm)
back from the face of the cabinet (pushing
the face of the drawer out 1/4" (6 mm))
Top view
C
L
Cabinet face
Drawer
face
Mounting
cleat
Anti-Tip Block
*Can also be installed using an electrical outlet in an adjacent cabinet within the area where the provided electrical cord can reach.
Power cord access hole in cabinet should be a minimum 1 1/2" (38 mm) diameter hole and deburred of all sharp edges.
22 1/8"
(562 mm)
Mounting cleat
opening width
Mounting
Flange
Flush Installation Deflector Vent
Side View
Front
Face of
Cabinet
16 15/16"
(430 mm)
Flush
Opening
Height
3/4" (19 mm)
Shelf
1 3/4" (44 mm)
Front Face of Shelf
Anti-Tip Block
No Oven
Front View
Suggested
Electrical
Outlet
Location
Anti-Tip Block
3/4" (19 mm)
Shelf
22 1/8" (562 mm)
Mounting Cleat Opening Width
24 3/16" (614 mm) Min
24 1/2" (622 mm) Max
Flush Opening Width
Shelf detail showing the deflector vent installed.Shelf detail showing the deflector vent
during installation.
Position deflector vent and mark holes.
Pre drill using a 1/16" (1.57 mm) bit before mounting.
DEFLECTOR VENT KIT INSTALLATION – REQUIRED FOR FLUSH AND TRUE FLUSH INSTALLATION
DEFLECTOR VENT KIT INSTALLATION – REQUIRED FOR FLUSH AND TRUE FLUSH INSTALLATION