Specification Sheet

Page 3 of 4 | Effective 7/20 | WCAG
FLUSH INSTALLATION – CLEAT OPTION
FLUSH INSTALLATION
SKSIT3601G
36-INCH
FLEX INDUCTION COOKTOP
4" X 8" (102 mm x 203 mm)
opening to route armored
cable if panel is present.
CUTOUT DIMENSIONS
CUTOUT DIMENSIONS – FLUSH INSTALLATION
30" min.
(762 mm)
Radius
36 5/8"
(930 mm)
33 7/8"
(860 mm)
21 1/16"
(535 mm)
49
19 5/1
mm)
6"
( 0
3/8"
(10 mm)
3 9/16" (91 mm)
2 7/16"
(62 mm)
4" x 8" (102 mm x 203 mm) opening to
route armored cable if panel is present
1/4"
(7 mm)
Right and left sideRight
36 7/8"
m(936 m )
1 7/16" min. (36 mm)
1 5/16" min. (33 mm)
1 1/8" min.
(28 mm)
3/4"
(19 mm)
1/4" (7 mm)
1 1/4" (32 mm)
Radius
1/2"
(13 mm)
4 17/32"
(115 mm)
3 9/16" (91 mm)
Height of conduit: 1 1/8" (29 mm)
21 5/16"
(541 mm)
Front and
back side
Right side
610 m
24" min.
( m)
Notes
The countertop
should be routed to
the pro les indicated
for  ush installation.
L-shaped support
cleats may be used
as an alternative.
•
All dimensions are stated in
inches and millimeters (mm).
CLEAT OPTION
For this installation, the countertop cut-out will be the same size
as the outer edge of the cooktop glass.
Attach L-shaped cleats to the perimeter of the countertop cut-out.
The top edge of the cleat will be attached 1/4" (7 mm) below the
surface of the countertop.
Refer to the Illustration below. Attach the cleats to the countertop.
Consult a countertop supplier for proper methods of attachment.
L-shaped support cleat
Countertop
Cooktop
L-Shaped Cleat
3/4"
(19 mm)
1/4" (7 mm)
L-shaped cleat (Front and Back)
1
2
3
1 1/4"
(32 mm)
1/4" (7 mm)
L-shaped cleat (Right and Left)
1
2
3
1
2
3