Specs

SKSFD3604P
36-INCH BUILT-IN FRENCH DOOR
REFRIGERATOR
CUSTOM PANEL DIMENSIONS
17 13/16"
(452 mm)
A
B
C
A
17 13/16"
(452 mm)
(125
4 mm)
49 3/8"
(233 mm)
9 3/16"
(533 mm)
21"
(908 mm)
35 3/4"
4" (102 mm)
OPTIONAL ACCESSORIES
SKSFD3604P
36" INTEGRATED FRENCH
DOOR REFRIGERATOR
CUSTOM PANEL DIMENSIONS
OPTIONAL ACCESSORIES
Notes
These units are designed to be customized with decorative panels. Field-
installed custom door panels or an optional Stainless Steel Pane
l Kit is required.
For Custom Panels: Use templates provided with units to pre-drill holes
for mounting panel brackets (provided with unit). Adjustment screws and
instructions also provide
d with units.
Maximum Panel Weight:
A – Fresh food door panels: 33 lbs.
B – Convertible drawer panel: 22 lbs.
C – Freezer drawer panel: 33 lbs.
Design Tips
4" (102 mm) will be visible on the interior sides of the furniture return. It is
recommended that both sides of each cutout panel be nished to match the
cabinet e
xterior.
If using custom panels, a custom toe kick is required. The bottom of case is
unnished.
Door Handles: Handles are not included with the refrigerator. Custom handles
are required for installation. Brushed Aluminum Handles are available as an
optional accessory.
SKSPK360FS – Stainless Steel Panel Kit for 36-inch Built-in French Door Refrigerator
Thi
s refrigerator can be installed with an optional Stainless Steel Panel Kit. Kit includes two
fresh food door panels, one convertible drawer panel, one freezer drawer panel, one toe kick
and four han
dles.
Handles for Use With Custom Panels
SKSHK310HS – 31 11/16" (805 mm) Medium Handle – Brushed Aluminum
Page 5 of 5 | Effective 1/22 | WCAG
SKSFD3604P
36-INCH BUILT-IN FRENCH DOOR
REFRIGERATOR
CUSTOM PANEL DIMENSIONS
Notes
These units are designed to be customized with decorative panels. Field- installed
custom door panels or an optional Stainless Steel Panel Kit is required.
For Custom Panels: Use templates provided with units to pre-drill
holes for mounting panel brackets (provided with unit). Adjustment
screws and instructions also provided with units.
Maximum Panel Weight:
A – Fresh food door panels: 33 lbs.
B – Convertible drawer panel: 22 lbs.
C – Freezer drawer panel: 33 lbs.
Design Tips
4" (102 mm) will be visible on the interior sides of the furniture return. It is
recommended that both sides of each cutout panel be finished to match the
cabinet exterior.
If using custom panels, a custom toe kick is required. The bottom of case is
unfinished.
Door Handles: Handles are not included with the refrigerator. Custom
handles are required for installation. Brushed Aluminum Handles are
available as an optional accessory.
OPTIONAL ACCESSORIES
SKSPK360FS – Stainless Steel Panel Kit for 36-inch Built-in French Door Refrigerator
This refrigerator can be installed with an optional Stainless Steel Panel Kit. Kit includes two fresh
food door panels, one convertible drawer panel, one freezer drawer panel, one toe kick and four
handles.
Handles for Use With Custom Panels
SKSHK310HS – 31 11/16" (805 mm) Medium Handle – Brushed Aluminum
Page 5 of 5