Spec Sheet

Page 5 of 5 | Eective 3/18
OPTIONAL ACCESSORIES – FLUSH OR PROUD INSTALLATION
SKSFD3604P
36" INTEGRATED FRENCH
DOOR REFRIGERATOR
CUSTOM PANEL DIMENSIONS – FLUSH INSTALLATION
17 13/16"
(452 mm)
A
B
C
A
17 13/16"
(452 mm)
(1254 mm)
49 3/8"
(230 mm)
9 1/16"
(533 mm)
21"
(102 mm)
(908 mm)
4"
v.10 p3
35 3/4"
OPTIONAL ACCESSORIES – FLUSH OR PROUD INSTALLATION
SKSFD3604P
36" INTEGRATED FRENCH
DOOR REFRIGERATOR
CUSTOM PANEL DIMENSIONS – FLUSH INSTALLATION
17 13/16"
(452 mm)
A
B
C
A
17 13/16"
(452 mm)
(1254 mm)
49 3/8"
(230 mm)
9 1/16"
(533 mm)
21"
(102 mm)
(908 mm)
4"
v.10 p3
35 3/4"


Notes
These units are designed to be customized with decorative panels. Field-installed
custom door panels or an optional Stainless Steel Panel Kit is required.
For Custom Panels: Use templates provided with units to pre-drill holes for
mounting panel brackets (provided with unit). Adjustment screws and instructions
also provided with units.
Maximum Panel Weight:
A – Fresh food door panels: 33 lbs.
B – Convertible drawer panel: 22 lbs.
C – Freezer drawer panel: 33 lbs.
Design Tips
4" (102 mm) will be visible on the interior sides of the furniture return. It is
recommended that both sides of each cutout panel be nished to match the
cabinet exterior.
If using custom panels, a custom toe kick is required. The bottom of case is
unnished.
Door Handles: Handles are not included with the refrigerator. Custom handles
are required for installation. Brushed Aluminum Handles are available as an
optional accessory.


This refrigerator can be installed with an optional Stainless Steel Panel Kit. Kit
includes two fresh food door panels, one convertible drawer panel, one freezer
drawer panel, one toe kick and four handles.

This unit can be installed in a 24" (610 mm) deep cutout with an optional frame kit.
This kit includes two 80" (2032 mm) brushed aluminum side trim pieces. Each trim
piece is 5" (127 mm) deep with a 1/8" (3 mm) front face.

SKSHK310HS – 31 11/16" (805 mm) Medium Handle – Brushed Aluminum
Design Tips
The Stainless Steel Panel Kit may be used in a ush 25" (635 mm) cutout depth
installation or in a proud 24" (610 mm) cutout depth installation.
For retrot/replacement installations where the existing cutout is 24" (610 mm)
deep, the optional frame kit is recommended.
SKSFD3604P
36" INTEGRATED FRENCH
DOOR REFRIGERATOR