Installation

Attaching Appliance to Enclosure

1. Screw the lugs on the safety bracket at the top of the

appliance to the top of the enclosure.

2. If there is a large gap between the top of the appliance

and the top of the enclosure, insert a piece of wood

between the lugs and the top of the enclosure to ll the

gap.

3. Screw the side safety brackets to the sides of the

enclosure.

NOTE: If installing two appliances side-by-side,

attach the appliances to each other using the

unication kit. Attach them to the sides of the

enclosure as if they were one unit.

4. Slide the top piece from the front ller assembly (a) in

at the top of the appliance until it engages with the top

safety bracket.

5. Once the top piece of the ller assembly is in place,

slide the base of the ller assembly in under it and

snap the top into the base (b).

NOTE: If installing two appliances side-by-side, attach

both top covers using the bolt found in the

accessories package.

4X15 4X

WARNING

• To avoid tipovers, the appliance must be attached to the

top of the enclosure.

• The top of the enclosure must be made of a solid material

(not MDF) that is at least 5/8" (16 mm) thick.