Installation

14
Installation
The following installation instructions describe the installation steps for various appliance
types:
• Refrigerator units with water dispenser
• Freezer units with ice maker
• Integrated refrigerator and freezer units with water dispenser and icemaker
The diagrams may be a general representation of your appliance.
Particular reference is made to special installation steps for individual appliance types.
Unpacking
WARNING
To avoid serious injury or product damage:
• DO NOT open appliance door unless the product is secured against tipping.
• The appliance is very heavy and is prone to tipping if not secured.
• To avoid injury, use 2 or more people and proper lifting techniques when lifting or moving
the appliance.
Check appliance for damage in transit.
Do not install the appliance if it is visibly damaged.
If in doubt, contact your dealer.
1. Remove the packaging carton, being careful not
to damage the surface of the appliance.
2. To avoid oor damage, place packaging
cardboard or plywood under the appliance.
3. Remove accessories on the sides and
underneath the appliance.
NOTE:
To avoid damaging parts, do not remove the
protective shipping materials inside the appliance
until the installation is complete.
4. Installation Preparation
Unpack installation materials and accessories.
To simplify installation, the packages are
identied with labels A, B and C corresponding to
the manual sections.
CAUTION:
Appliance is very heavy. Use two or more people
when lifting or moving the appliance.
5. Remove shipping brackets (a) and lift the
appliance off the pallet.
a
a
a