Installation

11
ENGLISH
SKSFD3604P – 36” INTEGRATED FRENCH DOOR REFRIGERATOR
NOTES
Trimmed units are designed to be customized with decorative panels. Field-installed 3/4" (19 mm)
custom door panels are required.
For custom panels: Use templates provided with units to pre-drill holes for mounting panel brackets
(provided with unit). Adjustment screws and instructions also provided with units.
The maximum total weight for custom panels for the 36" French Door model is 88 lb. For maximum
weights for each panel, see the spec sheet.
DESIGN TIPS
4" (102 mm) will be visible on the interior sides of the cutout. It is recommended that the
interior of the enclosure be nished to match the exterior. For retrot/replacement installations,
the optional frame kit may be used.
If using custom panels, a custom toe kick is required.
The bottom of the case is unnished.
Door Handles: Handles are not included with the units.
Custom handles are required for installation. Brushed aluminum handles are available as an optional
accessory.
3/4" (19 MM) CUSTOM PANEL DIMENSIONS – FLUSH INSTALLATION
35 3/4"
(908 mm)
49 3/8"
(1254 mm)
9 3/16"
(233 mm)
4"
(102 mm)
21"
(533.5 mm)
17 13/16"
(452 mm)
17 13/16"
(452 mm)
Door Panel Door Panel
Door Panel
Toe-kick Panel
Door Panel