Installation

10
NOTE
Door Swing Clearances
The installation must allow for clearances to adjacent walls or cabinets. This freezer is equipped with
a 2-position door stop.
The factory-set 115° door swing can be adjusted to 90° if clearance to adjacent cabinets or walls is
restricted.
Door Handle Clearances
The door handle depth must be added to the dimension where noted to determine the total
clearance required from adjacent cabinets or walls. This clearance will vary depending on the custom
handle used. When using Signature Kitchen Suite handles or the Signature Kitchen Suite stainless
steel door panel kit with handles (optional accessories), the door handle clearance with the door
open 115° is 12" (305mm).
INSTALLATION CLEARANCES
TOP VIEW
90°
115°
9 1/4"*
(235 mm)
9 1/4"*
(235 mm)
24"
(610 mm)
20 15/16"
(530 mm)
36" (914 mm)
1/8"
(3mm)
min.
17 13/16"
(452 mm)
17 13/16"
(452 mm)
1/8"
(3mm)
min.
90°
115°
3/4"
(19 mm)**
Door handle must be added to this dimension.
*
**
Varies depending on the thickness
of the custom cabinet panel.
3/4" (19 mm) is relevant when
using the Stainless Steel Door
Panel Kit (optional accessory).
35 3/4"(908 mm)