Manual
35TROUBLESHOOTING
ENGLISH
,FH:DWHU
3UREOHP 3RVVLEOH&DXVH Solutions
Icemaker is not
PDNLQJLFH
7KHLFHGHWHFWLQJVHQVRULV
REVWUXFWHG
Foreign substances or frost on the ice-detecting sensor
can interrupt ice production. Make sure that the sensor
area is clean at all times for proper operation.
7KHIUHH]HULVQRWFRQQHFWHG
to a water supply or the supply
shutoff valve is not turned on.
Connect the freezer to the water supply and turn the
water shutoff valve fully open.
Icemaker shutoff (arm or
VHQVRUREVWUXFWHG
If your icemaker is equipped with an ice shutoff arm,
make sure that the arm moves freely. If your icemaker
is equipped with the electronic ice shutoff sensor, make
sure that there is a clear path between the two sensors.
Reverse osmosis water
¿OWUDWLRQV\VWHPLVFRQQHFWHG
to your cold water supply.
5HYHUVHRVPRVLV¿OWUDWLRQV\VWHPVFDQUHGXFHWKH
water pressure below the minimum amount and result
in icemaker issues. (Refer to the Connecting the Water
Line section.)
,FHKDVEDGWDVWHRU
odor.
Water supply contains
minerals such as sulfur.
$ZDWHU¿OWHUPD\QHHGWREHLQVWDOOHGWRHOLPLQDWHWDVWH
DQGRGRUSUREOHPV127(,QVRPHFDVHVD¿OWHUPD\
not help. It may not be possible to remove all minerals/
odor/taste in all water supplies.
Icemaker was recently
installed.
Ice that has been stored for too long will shrink, become
cloudy, and may develop a stale taste. Throw away old
ice and make a new supply.
7KHIRRGKDVQRWEHHQVWRUHG
properly in the compartment.
Rewrap the food. Odors may migrate to the ice if food is
not wrapped properly.
7KHLQWHULRURIWKHIUHH]HU
QHHGVWREHFOHDQHG
See the Maintenance section for more information.
7KHLFHVWRUDJHELQQHHGVWR
EHFOHDQHG
Empty and wash the bin (discard old cubes). Make sure
that the bin is completely dry before reinstalling it.
,FHPDNHULVPDNLQJ
too much ice.
Icemaker shutoff (arm/ sensor)
LVREVWUXFWHG
Empty the ice bin. If your icemaker is equipped with an
ice shutoff arm, make sure that the arm moves freely. If
your icemaker is equipped with the electronic ice shutoff
sensor, make sure that there is a clear path between the
two sensors. Reinstall the ice bin and wait 24 hours to
FRQ¿UPSURSHURSHUDWLRQ










