ASSEMBLY INSTRUCTIONS
To use a cam lock: (Please read below instructions before assembling) 1. Insert cam screw into hole as shown in diagram A . Diagram B Diagram C Make sure not to insert the cam screw: Too deep as shown in figure B as this will cause the cam screw to be misaligned and unable to interlock properly. Also avoid inserting the cam screw too close to the surface of the hole as shown in figure C, as this will cause the cam lock to be too loose, and not interlock properly. 2. Connect the panels together.
Part list A1 Qty:1 A2 Qty:1 Fixed Shelf A5 Top Panel A4 Qty:1 Qty:1 A8 Upper Right Side Panel Qty:1 A10 A10 Lower Right Side Panel Qty:8 Door A8 Upper Left Side Panel Qty:1 A3 Divider Qty:1 A6(L&R) Apron Bottom Panel A7 Qty:2 Qty:1 A9 A9 Lower Left Side Panel
Part list A1 A6R A8 A6L A7 A2 A6R A6L A3 A6R A6L A9 A2 A6R A6L A4 A5 A10
Hardware list B1. Cam-lock Qty: 28 B2. Wood Dowel Qty: 19 B3. Screw Qty: 4 B4. Knob with bolt Qty:8 B5. Magnet with screw Qty: 4 B6. Shelf support Qty: 16 B7 . Wall Anchor Qty: 2 D ia: 1/ 8 " APPENDIX: Dimension of Hardware in this AI.
Assembly instructions B5: 4SETS B5 A1 B5 A2 A3 X2 B5 Step1: Attach Magnets B5 to the bottom of the top panel A1, fixed shelves A2 and Divider A3 using included screws as shown above.(Holes are pre-drilled.) B1: 2SETS B2: 1PC A4 B1 B2 B1 A5 Step 2: Assemble Apron A5 to Bottom Panel A4 using Cam-locks B1 and Wood Dowel B2 as shown above.
Step 3: Assemble Lower Right Side Panel A10 to Fixed Shelf A2 and Bottom Panel A4 using Cam-locks B1 and Wood Dowels B2 as shown above. Step 4: Assemble Lower Left Side Panel A9 to Fixed Shelf A2 and Bottom Panel A4 ,Lower Right Side Panel A10 using Cam-locks B1 and Wood Dowels B2 as shown above.
B3 B3 B3 B3 B3: 4PCS B2: 4PCS A3 B2 B2 B2 B2 A10 A9 Step 5: Assemble Divider A3 to Lower Side Panel A9 & A10 using Screws B3 and Wood Dowels B2 as shown above. B1: 2SETS B2: 1PC A8 B1 B1 B2 A2 B1 B1 Step 6: Assemble Fixed Shelf A2 to Upper Right Side Panel A8 using Cam-locks B1 and Wood Dowel B2 as shown above.
B1: 5SETS B2: 3PCS A8 A7 A2 B1 B1 Step 7: Assemble Upper Left Side Panel A7 to Fixed Shelf A2 and Upper Right Side Panel A8 using Cam-locks B1 and Wood Dowels B2 as shown above. A1 B1 B1 B2 A7 B1 B2 B1: 4SETS B2: 2PCS B1 A8 Step 8: Assemble Top Panel A1 to Upper Side Panel A7 & A8 using Cam-locks B1 Wood Dowels B2 as shown above.
A1 B1: 4SETS B2: 2PCS A2 A8 A7 B1 B1 B2 B1 B2 B1 A3 A9 A10 Step 9: Assemble Upper Side Panel A7 & A8 to Divider A3 using Cam-locks B1 and Wood Dowels B2 as shown above. B6 B4 B4: 8SETS B6: 16PCS B6 B4 A6L x4 A6R B4 B6 B6 Step 10: Attach Door Knob B4 to Doors A6 L&R using included bolts as shown above. Step 11: Insert Door Pin B6 into the hole on both end of Doors A6 L& R as shown above.
A1 A6L Fig.2. A6L A2 A6L A2 Fig.1. Step 12: Connect Door A6L to the fixed shelf A2 ,refer to Fig.1. Press the Upper Pin on Door A6L see Fig.2. and insert Door A6L carefully into the cabinet with the upper pin popping up into the holes of top panel A1. Step 13: Repeat step 12 to assemble the rest of doors. B7: WALL 2sets B7 B7 WA LL Step 14 : For your safety, please attached this unit to the wall by Wall Anchor with screws B7 as shown above.
