ASSEMBLY INSTRUCTIONS Style # K3026 Baker's Rack TIN HN WE 5 NOTE TO CUSTOMERS: For ease and speed of assembly we recommend that before you commence each step of the assembly that you identify all the parts required to complete that step. We recommend that where possible you allow sufficient space to assemble the item as close as possible to the place where it will be once assembled.
Part List Left Leg Right Leg Cross Rack Netting Rack 1PC IPC 1PC PCS Al0 Left Side Frame Right Side Frame Small Netting Rack Top Panel 1PC 1PC 1BC 2PC 1PC Hardware List B1 PCS | B2 PCS | B3 PCS Wp ap Ross Bolt Bolt Screw B4 PCS | BS PCS | B6 1PC Anchor Allen Wrench Screw A WARNING: Serious or fatal injuries can occur from furniture tip-over. To help prevent furniture tip-over: * Use provide mounting hardware to secure furniture to the wall. This may reduce but not eliminate the risk of furniture tip-over.
STEP 1 Bl up apes B6 = Assemble Lower Back Rack A3 to Legs A1&A2 using Bolts Bl . Note: Please do not tighten Bolts B1 until step 6. STEP 2 Bl agp pests B2 a@g PCs B6 = Assemble Netting Racks AS & Cross Rack A4 to Legs A1&A2 using Bolts Bl &B2. Note: Please do not tighten Bolts B1 &B2 until step 6.
STEP 3 @g Apes Jar B2 Assemble Side Frames A6&A7 (L&R) to Legs A1&A2 using Bolts B2 . Note: Please do not tighten Bolts B2 until step 6. STEP 4 Bl B6 PCs —1 Assemble Upper Back Frame AS to Side Frames A6&A7 (L&R) using Bolts B1 . Note: Please do not tighten bolts B1 until step 6.
STEP 5 Bl caps B2 PCs INN BA A Tn Assemble Small Netting Rack A9 to Side Frames A6&A7 (L&R) using Bolts B1&B2 . STEP 6 Rr Attach Top Panel A10 to Cross Rack A4 and Upper Back Rack A8 using Screws B5 . Note: Place the unit on the floor to check if it is stable before ti heightening all of bolts at this point.
For your safe, please attach the unit to the wall by Screws B3 & Anchors B4 as shown above.
