Installation & Assembly

2
INSTALLATION
INSTALACIÓN
3. Using a screwdriver, attach the mounting bracket to
the wall with the mounting screws. Make sure the flat
side of the mounting bracket is flat against the wall.
3. Con un destornillador, adhiera el soporte de instalación
a la pared con los tornillos de instalación. Asegúrese de
que la parte plana del soporte de instalación esté
adherida contra la pared.
4. Place the bathroom accessory over the mounting
bracket and tighten set screw with hex wrench.
4. Coloque el accesorio sobre el soporte de instalación y
ajuste el tornillo de fijación con la llave hexagonal.
1. Position the mounting bracket on the wall where
desired. Using a pencil, lightly mark the location of
mounting screws on the wall. NOTE: Mounting
bracket should be oriented properly and level.
1. Posicione el soporte de instalación en el lugar de la
pared que desee. Con un lápiz, marque suavemente en la
pared el lugar de los tornillos de instalación. NOTA: El
soporte de instalación debe estar orientado
correctamente y nivelado.
2. At the marked location, drill a pilot hole with the
appropriate drill bit for the wall surface or material.
NOTE: If installing into drywall, be sure to use drywall
anchors.
2. En el lugar marcado, perfore un orificio guía con la
broca adecuada para la superficie o el material de la
pared. NOTA: En caso de instalarlo en una pared de yeso,
asegúrese de utilizar anclajes para pared de yeso.
1.800.221.3379
KEY WEST & BEASLEY
BATHROOM ACCESSORY INSTALLATION
ACCESORIOS DE BAÑO INSTALACIÓN
SKU: 948195, 948189, 948201, 948207, 948214, 948233, 948234, 948235, 948236, 948237