Installation guide
Page 15
Specifications
*
:
Body Stainless Steel / Tempered Glass
3RZHU5DWLQJ 220V/50Hz or 120V/60Hz (USA & Canada standard)
General Input Power 358 W (218W + 4x35W)
Motor Input Power 218 W
0RWRU5HYROXWLRQ 600 RPM (±10%) to 1800 RPM (±10%)
Levels Of Speed Control 6 Levels
Maximum Airflow 860 CFM
$LU3UHVVXUH 320 pa
Noise Level (dB / sone) Approximately 23 / 0.3 to 68 / 7.0 (Lowest to highest Speed)
Motor Type Dual Chamber Ultra Quiet
Fan Type Dual Centrifugal / Sirocco
Control Type Dual Electronic Control Panels with LCD Display
Filtration Type Aluminum Filter with Reversible Handle
Illumination 35W Maximum, Dimmable
Venting Size Top, 6 inches Round
Interference Protection Radio Frequency Interference Protected
* Subject to change without notice, please contact your local reseller for details.
Use and Care Information
Operations:
Read and understand all instructions and warnings in this manual before operating the appliance. Save these
LQVWUXFWLRQVIRUIXWXUHUHIHUHQFH
Always leave safety grills and filters in place. Without these components, operating blowers could catch on to
hair, fingers and loose clothing.
NEVER dispose cigarette ashes, ignitable substances, or any foreign objects into blowers.
NEVER leave cooking unattended. When frying, oil in the pan can easily overheat and catch fire. The risk of
self combustion is higher when the oil has been used several times.
NEVER cook on “open” flames under the range hood. Check deep-fryers during use: Superheated oil may be
flammable.
Cleaning:
The saturation of greasy residue in the blower and filters may cause increased inflammability. Keep unit clean
and free of grease and residue build-up at all times to prevent possible fires.
Filters must be cleaned periodically and free from accumulation of cooking residue (see cleaning instructions
on Page 17). Old and worn filters must be replaced immediately.
DO NOT operate blowers when filters are removed. Never disassemble parts to clean without proper instruc
tions. Disassembly is recommended to be performed by qualified personnel only. Read and understand all
instructions and warnings in this manual before proceeding.
Specifications