Specification Sheet

Table Of Contents

Code: SHXCRD100E,

OBPF1F80037

REVISED 4/11/2022

CODES/STANDARDS

ASME A112.18.1/CSA B125.1

NSF/ANSI 372

NSF/ANSI 61

ICC/ANSI A117.1

CEC Listed

CALGreen

Massachusetts Accepted

SKU: 951733-S

Installation Type: Single-Hole

Features: Pull-Down

Design: Modern

Length: 10-1/4"

Width: 11-1/4"

Height: 16-7/8"

Base Plate Length: 10-1/4"

Faucet Centers: Single-Hole

Drain Included: No

Faucet Material: Brass

Handle Type: Lever

Handle Length: 4"

Base Plate Width: 2-1/4"

IPS: 1/2"

Flow Rate: 1.75 gpm @60 psi

Kitchen Faucet Holes: 1

Hand Sprayer Material: Plastic

Height To Spout: 8"

Spout Reach: 9-1/8"

Swivel Spout: Yes

Handle Height: 1-5/8"

Ceramic Disc Cartridges: Yes

Hot and Cold Indicators: No

FEATURES

See Website For Warranty Information

signaturehardware.com/warranty

signaturehardware.com

RIDGEWAY PULL-DOWN TOUCHLESS KITCHEN

FAUCET WITH DECK PLATE

PAGE 1
RIDGEWAY PULL-DOWN TOUCHLESS KITCHEN FAUCET WITH DECK PLATE SKU: 951733-S FEATURES CODES/STANDARDS ASME A112.18.1/CSA B125.1 NSF/ANSI 372 NSF/ANSI 61 ICC/ANSI A117.1 CEC Listed CALGreen Massachusetts Accepted Installation Type: Single-Hole Features: Pull-Down Design: Modern Length: 10-1/4" Width: 11-1/4" Height: 16-7/8" Base Plate Length: 10-1/4" Faucet Centers: Single-Hole Drain Included: No Faucet Material: Brass Handle Type: Lever Handle Length: 4" Base Plate Width: 2-1/4" IPS: 1/2" Flow Rate: 1.
PAGE 2
RIDGEWAY PULL-DOWN TOUCHLESS KITCHEN FAUCET WITH DECK PLATE SKU: 951733-S SHXCRD100E, OBPF1F80037 11-1/4" (286 mm) 10-1/4" (260 mm) 9-1/8" (232 mm) 16-7/8" (429 mm) 4" (102 mm) 1/4" (7 mm) 1-5/8" (41 mm) 8" (203 mm) 2-3/4" (70 mm) Max 2-1/2" (62 mm) 9/16"-24UNEF-2B (for 3/8" supply stop connection) All dimensions and speciﬁca�ons are nominal and may vary. Use actual products for accuracy in cri�cal situa�ons. See Website For Warranty Informa�on signaturehardware.com/warranty signaturehardware.