Installation Sheet

ACRYLIC PEDESTAL TUB
Acrylic Pedestal Tub Installation 4
5. Apply 100% neutral cure silicone sealant to the underside
of the drain flange and thread it through the tub and into the
drain pipe. Apply thread sealant or plumber’s tape to the
threaded connection to ensure a water-tight seal. Tighten
by hand. Wipe away any excess sealant using a damp cloth.
6. Fill the tub with water to check for any leaks from
the connections. Verify that the drain is working
properly.
7. Finish your installation by applying a bead of silicone
sealant around the base of the tub where it meets the
floor. Wipe away any excess sealant with a damp cloth.
TUB AND DRAIN WITH OVERFLOW
1. Set the tub in the desired installation location and
drop a plumb line from the center of the overflow hole to
the floor. This will determine your drain location. Mark
the drain hole location on the floor.