Installation Sheet

ACRYLIC PEDESTAL TUB
Acrylic Pedestal Tub Installation 2
STEP 1: ATTACH THE PLINTH
1. Clean and dry the area of contact between the tub
and plinth on both items.
2. Remove hardware from bottom of tub if necessary
(bolt caps, nuts, washers).
3. Apply a bead of 100% neutral cure silicone
sealant to the plinth along the area that will make
contact with the tub.
4. Firmly place the tub onto the plinth and wipe away
any excess sealant with a damp cloth. Allow the silicone
to dry for 24 hours.
5. When the silicone is dry, carefully lay the tub and
plinth upside down so that the bottom of the tub is
facing up. Attach the mounting brackets.
Important: Lift by the rim of the tub, Do not lift the
tub by the plinth.
6. Tighten the bolts, alternating from one to another until
all are secure.
Important: Do not overtighten. Overtightening could
result in cracking the acrylic.
INSTALLATION
Tu b
Plinth
24 hr