Installation Sheet

ManualsBrandsSignature Hardware ManualsPlumbingSocorro 60" Cast Iron Soaking Pedestal, Slipper Freestanding Tub with Integrated Drain and Overflow, 7" Rim Holes and Tap Deck

SOCORRO

CAST IRON SLIPPER PEDESTAL TUB

SKU: 918372

REVISED 04/01/2020

CODES: 517298, 517299, 442225, 503091

515156, 503092, 503241, 503093, 503240

503094, 503239, 503095, 503238, 503096

503237, 503097, 503236, 503104, 508557

508558, 508559, 508560, 508561, 508562

503099, 508522, 508523, 508524, 501867

508526, 508527

GETTING STARTED

TOOLS AND MATERIALS:

BEFORE YOU BEGIN

We recommend consulting a professional if you are



plumbing. Signature Hardware accepts no liability for



injury during installation.

Observe all local plumbing and building codes.

Unpack and inspect the tub for damage. If any damage

is found, contact our Customer Relations team at

1-866-855-2284.

*not included

Ensure that you have gathered all of the required

materials that are needed for the installation.





Keep the plumbing connections around the tub

easily accessible for any future maintenance that

may be necessary.

PLANNING





can be found and downloaded from the product page

on our website.





recommend performing any rough-in procedures

with the tub on site. For on-site rough-in information,

go to the appropriate drain installation section.

Pencil*

Tape Measure*

Straight Edge*

Hacksaw*

Thread Sealant*

Plumber’s

Tape*

Adjustable

Wrench*

Neutral Cure

Silicone Sealant*

Damp

Cloth*

Level*

Plumb Line

For Warranty information, please visit: signaturehardware.com/services/warranty

Summary of content (5 pages)

PAGE 1
SOCORRO CAST IRON SLIPPER PEDESTAL TUB SKU: 918372 BEFORE YOU BEGIN TOOLS AND MATERIALS: We recommend consulting a professional if you are unfamiliar with installing bathroom �xtures and plumbing. Signature Hardware accepts no liability for any damage to the �oor, walls, plumbing, or personal injury during installation.
PAGE 2
SOCORRO CAST IRON SLIPPER PEDESTAL TUB SKU: 918372 INSTALLATION 3. Carefully set the tub back into position and adjust the leveling feet as necessary. If your tub does not have leveling feet, shims may be used. Once level, apply a generous bead of silicone on the bottom of the feet. This will prevent the tub from shifting after installation. 1. Set the tub in the desired installation location and drop a plumb line from the center of the over�ow hole to the �oor. This will determine your drain location.
PAGE 3
SOCORRO CAST IRON SLIPPER PEDESTAL TUB SKU: 918372 6. The over�ow tee (A) will be attached at the points where the drain pipes intersect (B). 8. Remove the drain and over�ow assembly from the tub, and trim the pipes at the marked locations with a hacksaw. Make sure that the blade is suitable for cutting metal A B 9. Apply thread sealant or plumber’s tape to the threaded ends of all pipes prior to assembly. If two pipes arrive attached, be sure to take them apart and do the same.
PAGE 4
SOCORRO CAST IRON SLIPPER PEDESTAL TUB SKU: 918372 11. Install the over�ow assembly with the beveled washer, over�ow plate, mounting screw (provided) and any other washers or rubber sealing gaskets included. Apply a bead of silicone sealant to the underside of the �ange. 13. Attach the drain tube and �ange to the waste and over�ow tee with the sealing washer and slip nut. The beveled end of the sealing washer should face the tee. 14.
PAGE 5
SOCORRO CAST IRON SLIPPER PEDESTAL TUB SKU: 918372 CLEANING AND MAINTENANCE 15. Finish your installation by applying a bead of silicone sealant around the base of the plinth where it meets the �oor. Wipe away any excess sealant with a damp cloth. Cast iron tubs have a porcelain enamel surface that is fused to the cast iron under high temperatures and is one of the best heat-resistant coatings available. Porcelain enamel is a hard, glass-like surface that is not easily scratched and is extremely durable.