Specification Sheet

ManualsBrandsSignature Hardware ManualsPlumbingLentz Floor Mounted Tub Filler Faucet - Includes Lever Handle, Hand Shower, Valve Included

See Website For Warranty Information

www.signaturehardware.com/warranty

www.signaturehardware.com

REVISED 05/13/2021

CONTENTS

FEATURES

Material: Brass

Installation Type: Freestanding

Design: Modern

Handle Type: Lever

Hot and Cold Indicators: No

Ceramic Disc Cartridges: Yes

Hand Shower Maximum Flow Rate: 1.8 gpm

(6.8 L/min) @ 80 psi

Tub Spout Maximum Flow Rate:10.5 gpm

(39.7 L/min) @ 80 psi

Single Function Hand Shower Included

Integral Diverter to Hand Shower

Handshower Includes Factory Installed Backﬂow

Prevention Check Valve

Optional Rough-In Valve

Installation on an Existing Concrete Slab will

Require Cutting and Concrete Removal

FREESTANDING TUB FAUCET .................. PAGE 2

ROUGH-IN VALVE WITH STOPS ............... PAGE 3

ROUGH-IN VALVE WITHOUT STOPS ....... PAGE 4

LENTZ

FREESTANDING TUB FAUCET - LEVER HANDLE

SKU: 951348

Summary of content (4 pages)

PAGE 1
LENTZ FREESTANDING TUB FAUCET - LEVER HANDLE SKU: 951348 FEATURES Material: Brass Installation Type: Freestanding Design: Modern Handle Type: Lever Hot and Cold Indicators: No Ceramic Disc Cartridges: Yes Hand Shower Maximum Flow Rate: 1.8 gpm (6.8 L/min) @ 80 psi Tub Spout Maximum Flow Rate:10.5 gpm (39.
PAGE 2
LENTZ FREESTANDING TUB FAUCET - LEVER HANDLE SKU: 951348 12-7/8" (327 mm) 9-1/2" (241 mm) 8-3/8" (213 mm) 1" (25 mm) 8-3/8" (213 mm) 3-3/4" (95 mm) 42-5/8" (1083 mm) 37-3/8" (949 mm) 57-5/8" (1464 mm) Hose Length 27-7/8" (708 mm) 5-7/8" (149 mm) FEATURES Max Deck Thickness: 1" Length: 8-3/8" Width: 12-7/8" Height: 42-5/8" Height to Control Valve: 27-7/8" Height to Spout: 37-3/8" Spout Reach: 9-1/2" Handle Length: 3-3/4" Base Plate Diameter: 5-7/8" Hand Shower Hose Length: 57-5/8" 5-7/8" (149 mm) COD
PAGE 3
LENTZ OPTIONAL FREESTANDING TUB FAUCET ROUGH-IN VALVE SKU: 951348 5-1/4" (133 mm) 3-5/8" (92 mm) HOT 1/2" NPT COLD 3" (76 mm) Finish Floor Min: 1-5/8" (41 mm) Finish Floor Max: 5-1/8" (130 mm) FEATURES Material: Brass Length: 3-1/2" Width: 3-5/8" Height: 5-1/8" Finish Floor Min: 1-5/8" Finish Floor Max: 4-5/8" NPT Connection: 1/2" CODES/STANDARDS cUPC ASME A112.18.1/CSA B125.1 Massachusetts Accepted All dimensions and specifications are nominal and may vary.
PAGE 4
F R E E S TA N D I N G OPTIONAL TUB FAUCET ROUGH-IN VALVE SKU: 446521 3-5/8" (92 mm) 3-12" (89 mm) HOT 1/2" NPT COLD 3" (76 mm) Finish Floor Min: 1-5/8" (41 mm) Finish Floor Max: 5-1/8" (130 mm) FEATURES Material: Brass Length: 3-1/2" Width: 3-5/8" Height: 5-1/8" NPT Connection: 1/2" CODES/STANDARDS cUPC ASME A112.18.1/CSA B125.1 Massachusetts Accepted All dimensions and specifications are nominal and may vary. Use actual products for accuracy in critical situations.