Installation Sheet

4
1. Apply a bead of silicone sealant around the top edge
of the vanity cabinet.
2. With assistance from another person, slowly and
carefully set the countertop onto the vanity cabinet.
Once positioned, press �rmly into place. Wipe away any
excess sealant using a damp cloth.
Important: The countertop is very fragile. Take caution
when handling, and have someone assist you.
3. If you are installing a side-splash and/or back-splash,
place a generous amount of silicone sealant on the
back of it and press it into place against your bathroom
wall. Fill any gaps that are left with silicone sealant. Wipe
away any excess sealant with a damp cloth.
4. Let the assembled vanity sit for 24 hours to allow all
the silicone sealant to fully dry. Once dry, proceed to
the installation of your faucet and drain.
Note: In some situations, it may be necessary to cut
the inner cabinet shelves to allow space for your
drain’s P-traps.
COUNTERTOP INSTALLATION
24 hr
FREY 48” VANITY
WITH VESSEL SINK
SKU: 949567, 949570, 949571