Installation Sheet

5
1.800.221.3379
SOLID SURFACE TUB WITH INTEGRAL DRAIN
BAÑERA DE SUPERFICIE SÓLIDA CON DRENAJE INTEGRADO
SKU: 948319 | 948320 | 948699 | 948700
2. Turn bathtub upside down and rest it on a moving
blanket, cardboard, or other soft surface to prevent
scratching the rim. Use caution when turning the
bathtub upside down, as the product may be heavy
and may require assistance to rotate.
2. Voltee la bañera hacia abajo y colóquela sobre una
manta móvil, cartón o sobre una superficie suave para
evitar rayar el borde. Tenga cuidado cuando voltee la
bañera hacia abajo, ya que el producto puede ser pesado
y podría necesitar ayuda para voltearla.
3. Place a level across the bottom of the tub to represent
floor level. Raise adjustable leveling supports to touch
level. Then, raise the support an additional 1/8" to ensure
the bathtub is supported by the support feet and not by
the tub walls.
3. Coloque un nivelador a lo largo de la parte inferior de la
bañera para representar el nivel del suelo. Eleve los
soportes de nivelado ajustables para tocar el nivel.
Después, eleve el soporte 1/8" más para asegurarse de
que la tina está apoyada en las patas de apoyo y no en las
paredes de la tina.
1. Set the tub in the desired location and mark the
drain hole location on the floor. Then, move the tub
away from the desired installation location so that the
plumbing can be installed.
1. Coloque la bañera en la ubicación deseada y marque la
ubicación del orificio de drenaje en el suelo. Posterior-
mente, mueva la bañera fuera de la ubicación deseada
para la instalación a fin de poder instalar el sistema de
plomería.
INSTALLATION:
WITHOUT UNDERFLOOR ACCESS /
SLAB FLOOR INSTALLATION
INSTALACIÓN:
SIN ACCESO DEBAJO DEL SUELO /
INSTALACIÓN SOBRE LA LOSA
DEL PISO
Moving blanket
Moving blanket
TOP
PARTE
SUPERIOR
BOTTOM
PARTE
INFERIOR
1/8”
Support feet
Patas de apoyo
Tub wall
Pared de
la bañera