Specification Sheet

See Website For Warranty Information

www.signaturehardware.com/warranty

1.800.221.3379

VILAMONTE

FREESTANDING TUB FAUCET WITH HAND SHOWER

SKU: 948665

REVISED 11/30/2020

FEATURES

Installation Type: Freestanding

Faucet Centers: Single-Hole

Handle Type: Lever

Features: Hand Shower Included

Tub Faucet Material: Brass

Handle Material: Metal

Drain Included: No

Ceramic Disc Cartridges: Yes

Hand Shower Material: Zinc

Tub Spout Flow Rate: 10.5 gpm (39.7 L/min)

@ 80 psi

Hand Shower Flow Rate: 1.8 gpm (6.8 L/min)

@ 80 psi

Single Function Hand Shower (Full Spray)

Integral Diverter to Hand Shower

Hand Shower Includes Factory Installed

Back�ow Prevention Check Valve

Optional Rough-In Valve Includes Stops

Under�oor Access is Required for Proper

Installation

Installation on an Existing Concrete Slab will

Require Cutting and Concrete Removal

CONTENTS

TUB FAUCET

VALVE

PAGE 2

PAGE 3

..................

PAGE 1
VILAMONTE FREESTANDING TUB FAUCET WITH HAND SHOWER SKU: 948665 CONTENTS TUB FAUCET .................. PAGE 2 VALVE .................. PAGE 3 FEATURES Installation Type: Freestanding Faucet Centers: Single-Hole Handle Type: Lever Features: Hand Shower Included Tub Faucet Material: Brass Handle Material: Metal Drain Included: No Ceramic Disc Cartridges: Yes Hand Shower Material: Zinc Tub Spout Flow Rate: 10.5 gpm (39.7 L/min) @ 80 psi Hand Shower Flow Rate: 1.8 gpm (6.
PAGE 2
VILAMONTE FREESTANDING TUB FAUCET WITH HAND SHOWER SKU: 948665 12-1/2" (318 mm) 9" (229 mm) 41-3/4" (1060 mm) 58" (1473 mm) 43-1/2" (1151 mm) 40" (1016 mm) 30-3/4" (381 mm) 6" (152 mm) 6" (152 mm) FEATURES Width: 12-1/2" Height: 43-1/2" Height To Spout: 40" Height to Control Valve: 30-3/4" Spout Reach: 9" Base Plate Length: 6" Base Plate Width: 6" Hand Shower Hose Length: 58" CODES/STANDARDS cUPC ASME A112.18.1/CSA B125.1 ASME A112.18.
PAGE 3
VILAMONTE OPTIONAL FREESTANDING TUB FAUCET ROUGH-IN VALVE SKU: 948665 5-1/4" (133 mm) 3-5/8" (92 mm) HOT 1/2" NPT COLD 3" (76 mm) Finish Floor Min: 1-5/8" (41 mm) Finish Floor Max: 5-1/8" (130 mm) FEATURES Material: Brass Length: 5-1/4" Width: 3-5/8" Height: 5-1/8" NPT Connection: 1/2" CODES/STANDARDS cUPC ASME A112.18.1/CSA B125.1 Massachusetts Accepted All dimensions and specifications are nominal and may vary. Use actual products for accuracy in critical situations.