Installation Sheet

7
ACRYLIC TUB WITH INTEGRAL DRAIN
INSTALLATION INSTRUCTIONS
4. Measure distance from bottom of tub drain threads
down into proper installation depth for trap adapter.
Tailpiece should extend into trap adapter approx. 2-3”
to ensure proper installation.
Note: Depending on the height of your under floor
plumbing, you may need to trim the tailpiece to the
appropriate length.
5. Move tub away from final location to complete floor
installation.
7. Install decorative tailpiece into trap adapter, Be
sure to install tailpiece lock nut and floor flange
before inserting tailpiece into trap adapter. This will
allow tailpiece to remain above the finished floor, as
a rough in.
6. Screw the drain’s pop-up mechanism onto the drain
cap. Then, install the assembly into the tub’s
pre-installed drain basket.
Tailpiece locking nut
Floor flange
Top of trap adapter
Finished floor
Tailpiece locking nut
Floor flange
Top of trap adapter
Finished floor