Installation Sheet

4
ACRYLIC TUB WITH INTEGRAL DRAIN
INSTALLATION INSTRUCTIONS
INSTALLATION
WITH UNDERFLOOR ACCESS
2. Turn bathtub upside down and rest it on padding or
other soft surface to prevent scratching. Use caution
when turning the bathtub upside down, as the product
may be heavy. Seek assistance if necessary to avoid
injury.
1. Set the tub in the desired location and mark the
drain hole location on the floor. Then, move the tub
away from the desired installation location so that the
plumbing can be installed. Leave a 2 1/4” diameter
hole for the tailpiece to go through. This will ensure
the supplied decorative floor flange will cover the
opening.
Soft Surface
TOP
BOTTOM
3. Use the provided hardware to attach each foot to the
tub. Thread the lock nut onto each mounting bolt,
followed by the metal washer. Tighten each bolt firmly
with an adjustable wrench.
Important: Do not to overtighten. Overtightening
could strip the bolt and/or crack the tub body.
4. Small gaps between the feet and tub are normal,
however, plastic or wood shims can be inserted
between the tub and the foot’s mounting hardware to
accommodate. Adjust the shim and locknut until you
reach the desired look.