Installation Sheet

3
ACRYLIC TUB WITH INTEGRAL DRAIN
INSTALLATION INSTRUCTIONS
5. Once the feet are in position and adjusted appropri-
ately, tighten the nuts that were used to secure the bar
to the bottom of the tub.
Important: Do not to overtighten. Overtightening
could strip the bolt and/or crack the tub body.
FEET WITHOUT MOUNTING BAR
1. Carefully lay the tub upside down on padding or
other soft surface so that the bottom of the tub is
facing up.
2. On the tub body, locate each of the mounting holes
for the feet. If the feet contain letters, match the letters
to the corresponding mounting location on the tub.